iSF6-718 SF6 LeakHawk
Description
The iSF6-718 quantative SF6 detector precisely measures SF6 concentration in air by means of a non-dispersive infrared sensor (NDIR sensor) and indicates the value on a graphic display in ppmv. The instrument has pre-search mode and in measurement mode, It allows precise localization of leaks by searching the highest SF6 concentration; just press the button, and it will enter "measurement mode" in which the leakage can be precisely located. Thanks to the high accuracy and the low detection limit it is possible to carry out integral measurements as well as measurements for determination of leakage rates.
To protect the device from being contaminated, the sensor is equipped with a filter which can be cleaned and/or exchanged easily by the operator. In case there is existing SF6 contamination, the iSF6-718 can be adjusted to this value prior to testing. Thus, it is possible to detect leakages even in already contaminated areas. The SF6 concentration is indicated in ppmv as well as by warnings of sound, light and vibration.
Key Features
- Non-radioactive sources; No need for pure argon or other pressurized gases
- Sensitivity unaffected by cross effects of moisture and volatile organic compounds (VOCs)
- Severe leaks, including 100% SF6 will not contaminate or damage the detector
- The sensitivity limit goes to as low as 0.5 ppmv about 0.31g/y SF6 (proximately 1.66 x 10-7 kPa x L/sec)
- Battery powered (working time approximately 8 hours)
- Quick response time T90≤3s
- Compact, light, and convenient
- Wireless connection, dual screen display, easy to operate
- Three alarm modes: sound, light, vibration
Specification
Measurement range：iSF6-718A: 0~50ppmv，Special ranges can be customized
iSF6-718B: 0~1000ppmv，Special ranges can be customized
Sensitivity：The sensitivity limit goes to as low as 0.5 ppmv about 0.31g/y SF6 (proximately 1.66 x 10-7 kPa x L/sec)
Measurement Accuracy：0~50ppmv: ≤±1% F.S.; 0~1000ppmv: ≤±1.5% F.S.
Sensitivity：No cross sensitivity to moisture (0-100% relative humidity, non-condensing) and volatile organic compounds (VOCs)
Display Accuracy：0.01 ppmv
Display unit：ppmv，g/y，cc/s
Operating temperature：0°C~+50°C
Storage temperature：-10°C~+60°C
Response time T90：≤3 s
Indicator：Graphic display + sound alarm + vibration + indicator
Power：Input 100~240VAC 50/60Hz; Output 8.4 VDC, 4A
Battery：7.4 V, 9000 mAh, lithium battery
Size：Handgun: 410mm x 87mm x 58mm, transportation case: 451mm x 259mm x 156mm
Weight：3.3kg(with transportation case), handgun: 1.3 kg
- It is configurated with zero and full scale calibration.
- It is equipped with wireless communication transmission with a range of more than 200 meters, with the console to achieve synchronous dual display of measurement data, which is convenient for two-person on-site inspection.
- Ability to maintain constant temperture, to ensure measurment accuracy.
- It has filter update prompt function.
- It supports remote firmware update.
- Its high altitude measurements have automatic compensation of atmospheric pressure.
- It's equipped with alarm threshold setting, sound, light, vibration alarm setting, can be opened and closed independently.
- English, German, and Chinese trilingual support.
- It connects to a PC through Type-C interface provided by the body to read historical measurement data.
- It supports the function of saving measurement data, browsing historical measurement data locally, and deleting historical data.
- Its measured data supports numerical and graphical curve display functions.
- Three measurement units are available: ppmv, g/y, cc/s.
- It has the function of low power reminder, and low power protection.
- It has a peak display and can be reset to clear peak data as needed.
- It has background gas elimination function.
Downloads
Brochures, Manual, Quick Start Guides, Software etc.
